View TLSH263P_1326535.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLSH263P
TOSHIBA LED Lamp InGaAP Red Light Emission
TLSH263P
Panel Circuit Indicator
* * * * * * * * * * * 5.0mm diameter InGaAP red LED All plastic mold type. Colorless clear lens Low drive current , high intensity red light emission Recommended forward current: IF = 15~20mA(DC) All plastic molded lens, provides an excellent on-off contrast ratio. Fast response time,capable of pulse operation. High power luminous intensity Without stand-offs. Wide radiation pattern. Applications: Suitable for backlighting. Unit in mm
Maximum Ratings (Ta = 25C)
Characteristic Forward current (DC) Reverse voltage Power dissipation Operating temperature range Storage temperature range Symbol IF VR PD Topr Tstg Rating 50 4 125 -30~85 -40~120 Unit mA V mW C C
JEDEC EIAJ TOSHIBA Weight: 0.25 g
4-5U1
1
2002-09-25
TLSH263P
Electrical And Optical Characteristics (Ta = 25C)
Characteristic Forward voltage Reverse current Luminous intensity Peak emission wavelength Spectral line half width Dominant wavelength Symbol VF IR IV p d IF = 20mA VR = 4V IF = 20mA IF = 20mA IF = 20mA IF = 20mA (Note) Test Condition Min 85 Typ. 2.1 300 623 15 613 Max 2.5 50 Unit V A mcd nm nm nm
(Note) : Lamps are classified into the following three ranks according to their luminous intensity. Measurement tolerance for each limit is 15%. N: 100-200mcd, P: 180-360mcd, Q: 320-640mcd.
Precaution
* * * Please be careful of the followings Soldering temperature: 260C max Soldering time: 3s max
(Soldering portion of lead: Up to 2mm from the body of the device) If the lead is formed, the lead should be formed up to 5mm from the body of the device without forming stress to the resin.Soldering should be performed after lead forming. This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp,please ensure that it will not be affected by this IR light.
2
2002-09-25
TLSH263P
IF - VF
50 30 Ta = 25C 1000 Ta = 25C
IV - IF
(mcd) Luminous intensity IV
500 300
(mA) Forward current IF
10
5 3
100
50 30 1
3
5
10
30
50
100
1 1.7
1.8
1.9
2.0
2.1
2.2
2.3
Forward current
IF
(mA)
Forward voltage
VF
(V)
IV - Tc
3 1.0
Relative Luminous Intensity - wavelength
F = 20mA Ta = 25C
IV
Relative luminous intensity
1
Relative luminous intensity
0.8
0.6
0.5 0.3
0.4
0.2
0.1
-20
0
20
40
60
80
0 580
600
620
640
660
680
700
Case temperature Tc
(C)
Wavelength
(nm)
Radiation Pattern
80 Ta = 25C
IF - Ta
20 30 40 50 60 70 80 90
10
0 10
20 30 40 50 60 70 80
Allowable forward current IF (mA)
60
40
20
0
0.2
0.4
0.6
0.8
90
0 0
20
40
60
80
100
Ambient temperature Ta (C)
3
2002-09-25
TLSH263P
RESTRICTIONS ON PRODUCT USE
000707EAC
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice.
4
2002-09-25

▲Up To Search▲

Price & Availability of TLSH263P

	To Download TLSH263P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .